Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Basic Operations
Loading and Exchanging
Media
The loading method depends on your printer. Choose
the method suited to your printer.
When using the SC-F7200/SC-F7100 Series
See the following section.
When using the SC-F7000 Series
"Loading Media (SC-F7000 Series)" on page 37
U
Notes on Loading Media
Whenever you attempt to load the media, check the
following cautions beforehand.
For information on the media that can be used in the
printer, see:
"Supported Media" on page 131
U
!
Caution:
❏ The heaters and media holding plate may be
hot; observe all necessary precautions. Failure
to observe the necessary precautions could
result in burns.
❏ Be careful not to trap your hands or fingers
when opening or closing the front cover.
Failure to observe this precaution could result
in injury.
❏ Do not rub your hands along the edges of the
media. The edges of the media are sharp and
can cause injury.
❏ Because the media is heavy, it should not be
carried by one person.
Load the media just before printing
The pressure rollers may crease media left in the printer.
The media may also become wavy or curled, causing
jams or resulting in the media coming into contact with
the print head.
Basic Operations
Observe the following points when handling media
If the following points are not observed when handling
media, small amounts of dust and lint may stick to the
media surface and cause ink drops in the print results.
❏ Do not place exposed media directly on the floor.
Media should be rewound and inserted in its
original packaging for storage.
❏ Do not carry media with the media surface pressed
against clothing.
Handle media in its indivdual packaging until just
before loading the media in the printer.
Do not set media if its right and left edges are uneven
If media is loaded and the right and left edges of the roll
are uneven, media feeding problems may cause the
media to move around during printing. Either rewind to
align the edges or use a roll without any issues.
Note:
For information on the media that can be used in the
printer, see:
"Supported Media" on page 131
U
Loading Media (SC-F7200/
SC-F7100 Series)
This section describes the methods to load media.
A
Press the P button , and then wait until Load
media.is displayed on the screen.
30
Advertisement
Table of Contents
