Epson SC-F7100 Series User Manual page 153

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
N
Use the hexagon wrench to tighten and firmly
secure the 4 screws.
O
Pull out the adjustment paper from the printer,
loosen the right roll holder fixing screw, and
move away the roll holder.
P
Remove the roll core.
See the next item and proceed to the parallel adjustment
of the Auto Take-up Reel Unit.
Appendix
Auto Take-up Reel Unit
The parallel adjustment method for the Auto Take-up
Reel Unit depends on your printer. Choose the method
suited to your printer.
"When using the SC-F7200/SC-F7100 Series" on
U
page 153
"When using the SC-F7000 Series" on page 159
U
When using the SC-F7200/SC-F7100 Series
A
Use the large hexagon wrench to loosen the four
fixing screws on the front of the printer as shown
in the illustration.
B
Loosen the roll core holder locking screws and
adjust the roll core holders so that the distance
between the two is wider than the roll core.
153