Otto Bock B400b400 Instructions For Use Manual page 38

Usage
► Ensure that creep speed is activated when the seat
height adjustment function is used. If this is not the
case, contact a specialist dealer immediately. Only use
the power wheelchair with the seat height adjustment
in its lowest position until the fault is rectified.
NOTICE
Lack of maintenance of the seat height adjustment
feature
Risk of damage to the power wheelchair
► Inspect the seat height adjustment feature for visible
signs of damage at least 1 x per month and ensure all
screw connections are tight.
► Check for correct tire pressure.
NOTICE
Risk of transportation damage.
Risk of damage to the power wheelchair
► Always lower the seat height adjustment feature fully
for loading or transportation.
INFORMATION
► Please also observe the safety instructions in the sec­
tion "Electric Seat Functions" > "Safety Instructions for
Use".
38 | Ottobock
► Observe the instructions for use in the sections "Elec­
tric Seat Functions" > and "Joystick Functions".
The power wheelchair can be equipped with a power seat
height adjustment feature. The seat height adjustment fea­
ture increases the height of the seat by up to 20 cm, driven
by a motor.
Fig. 16 Seat with raised seat height adjustment feature
The driving function at home remains available even when
the seat is raised. The speed is decreased as soon as the
seat is raised (creep speed), since the power wheelchair
becomes less resistant to tipping. This is indicated by the
flashing "Selected speed level" LED on the control panel:
B400