Porsche 1972 911 Workshop Manual page 86

in
10. Slide rocker panel cover between spacer
and washer. Tighten cover.
11. Place oil hoses along rear wheelhousing
and connect. If necessary, cut threads on stud.
12. Connect cooling coil t o oil lines.
13. Fasten cooling coil and lines to wheel-
housing.
14. Tighten all oil line connections.
15. Check for leaks. This requires the engine
oil temperature to b e at least 83 C (182 F),
so t h a t the pressure relief valve will release
the flow of oil t o the cooling coil.
0
0