Porsche 1972 911 Workshop Manual page 407

Description
Roller bearing
Thrust washer
1st speed
Needle bearing
Shift sleeve
Synchro hub
2nd speed
Needle bearing
Needle bearing race
3rd speed
M a n u a l T r a n s m i s s i o n
Note when
Installing
Press off pinionshaft Press on with
and VW 415 a.
Check synchronization.
Replace only in pairs.
Make sure bearings
have not been inter-
changed.
Check for wear.
Check for wear.
Check synchronization.
Replace only in pairs.
Make sure bearings
have not been inter-
.
nechanic' s wire
changed.
Make sure races have
not been interchanged.
must face thrust washer.
Replace only in pairs.
Special
instructions see
V W 407
From 1977 Models
with asymmetric
tooth point of
clutch body
From 1977 Models
with asymmetric
tooth point of 1st'
gear. Note direc-
tion of installation
(see Page 3.1-7/6)
From 1977 Models
reinforced
911