Table of Contents
Advertisement
C H E C K I N G C L U T C H PLAY
1. Raise car.
2. Press accelerator linkage operating lever on
transmission toward full throttle (bleeds servo).
Use left hand to press clutch intermediate
lever toward right rear wheel. Travel of
about 5 to
7
mm must be felt on the clutch
intermediate lever. 1f there is not enough
travel, remove engine/transmission assembly
and adjust clutch (basic adjustment 1 2 to
15 mm).
Remove engine/transmission assembly.
1 .
2. Remove cotter pin from clevis pin for
actuating rod and intermediate lever and
pull out clevis pin.
Pull out actuating rod mounted on servo up
3.
to stop and at the same time press inter-
mediate lever toward servo to stop.
In this position the actuating rod clevis must
b e located so that its bore is 1 2 to 15 mm
above the intermediate lever bore.
9 1 1
Hide quick links:
Advertisement
Table of Contents
