C a m s h a f t H o u s i n g a n d C y l i n d e r H , e a d
A D J U S T I N G T I M I N G
(Camshafts with Hexagon Head Mounting Bolts for Sprocket)
B a s i c S e t t i n g
1 . Turn crankshaft until mark
aligned with joint of crankcase or stripe on fan
housing.
2. Position both camshafts so that punch marks face
up. Engine has its basic setting (cylinder no. 1
= TDC and cylinder no.
adjusting mark
marks on camshafts to face
Z
= overlap) by
4
up.