Porsche 1972 911 Workshop Manual page 384

M a n u a l T r a n s m i s s i o n
From top edge of the bell housing to the root
of the claw in the throwout lever
Coat guide tube for throwout bearing with
8.
Modified Clutch Release Lever
mm.
79
The shape of the clutch release lever for trans-
mission types 915/40/45 has been modified due to
the location of the pipes of the new exhaust
system. This makes i t impossible to detach or
attach the transmission without first removing
the release lever.
After attaching the engine and transmission
together, the new release lever must be installed
so that it runs parallel to the clutch cable sleeve
flange.
Adjustment of the release fork and release lever
as in the past is omitted.
1975 Models