Porsche 1972 911 Workshop Manual page 897

R e m o v i n g a n d I n s t a l l i n g S e a t
(Also s e e Group
A two- pole connector is located under the seat.
In the driver's seat t h e connector wire leads into
t h e seat interior and is connected directly t o the
safety belt buckle. In t h e passenger's seat a n
additional seat contact is wired inbetween.
Prior to seat removal, t h e wire must b e dis-
connected a t t h e connector and also detached
from its retainer on seat underside. T h e wire must
b e reconnected upon installation of the seat: the
polarity makes no difference.
S A F E T Y B E L T W A R N I N G S Y S T E M
E l e c t r i c a l A c c e s s o r i e s
9
911