Porsche 1972 911 Workshop Manual page 249

R E M O V I N G A N D I N S T A L L I N G FUEL P U M P
R e m o v i n g
Remove guard.
1.
2. Loosen strap and pull fuel pump down a
little.
3. Clamp intake fuel hose shut with a pinch
clamp. Pull off wire connectors, remove
pressure fuel hose and catch escaping fuel.
R e p a i r s
1 9 7 6 MODEL
Loosen intake fuel hose clamp and remove
4.
fuel pump.
I n s t a l l i n g
new seals. Torque to 1 6
2.3 mkp.
N o t e
Hollow bolt seals have different thicknesses
and must be installed correctly. Place thicker
seal between coupling and pump body; thinner
seal between coupling and head of hollow
bolt.
2. Install wire connectors on to appropriate
terminals.
-
-
2 3 Nm/1.6