Table of Contents
Advertisement
I N S T R U C T I O N S FOR DISASSEMBLY A N D REASSEMBLY
D i s a s s e m b l y
Note the thickness and number of gaskets
when removing the oil pump cover to
.
simplify reassembly
Note proper orientation of the bushings. Mark
lubricating hole.
Use a KUKKO inside puller to remove
bushings of oil pump gears from oil pump
cover. Place a protector between the puller
and the cover to avoid damage to the sealing
surface.
R e a s s e m b l y
Drive bushings into oil pump cover with
special tool P 368, making sure that they are
properly positioned and fully in. T h e milled
ends of the oil pockets must point towards the
pressure chamber or oil pump gears,
respectively.
See sketch for exact location.
Hide quick links:
Advertisement
Table of Contents
