Table of Contents
Advertisement
M a n u a l T r a n s m i s s i o n
R E M O V I N G A N D I N S T A L L I N G D R I V E S H A F T SEAL
The drive shaft seal of 1976 model manual transmission 915 c a n b e replaced without having to
disassemble the transmission.
R e m o v i n g
1. Remove engine/transmission assembly and
separate transmission from engine.
2. Remove both Phillips countersunk bolts on
guide tube. Pull out guide tube for drive
shaft seal with a locally manufactured hock.
3. Remove seal with an appropriate mandrel or
screwdriver. Special tool P 381 can b e
applied.
-
1 9 7 6 MODEL
I n s t a l l i n g
1. Drive new seal in guide tube with special
tool P 381.
2. Place new rubber O-ring
tube.
Slide special tool P
drive shaft.
Apply a light coat of lubricant to sealing lip
of seal in guide tube and rubber O-ring on
guide tube neck.
Drive in guide tube until positioned correctly.
6. Install mounting bolts and torque to
specifications.
7. Coat release bearing guide tube with MoS2
paste.
neck of guide
over splines of
382
Hide quick links:
Advertisement
Table of Contents
