Copy And Scan Problems - Xerox EC70 User Manual

Troubleshooting

Copy and Scan Problems

When the copy or scan quality is poor, select the closest symptom from the following table to correct
the problem.
If the copy quality does not improve after carrying out the appropriate action, contact Xerox
Customer Support or your reseller.
Symptom
Lines or streaks only present in copies made
from the document feeder.
Spots present in copies taken from the
document glass.
The reverse side of the original shows on the
copy or scan.
Image is too light or dark.
Colors are off.
134 Xerox ® EC70 Color Copier/Printer
User Guide
Solution
There is debris on the document glass. When you scan, the
paper from the document feeder passes over the debris that
creates lines or streaks. Clean all glass surfaces with a lint
free cloth.
There is debris on the document glass. When you scan, the
debris creates a spot on the image. Clean all glass surfaces
with a lint free cloth.
Copy: Turn on Background Suppression.
Scan: Turn on Background Suppression.
Copy: Use the Image Quality settings to lighten, darken, or
adjust contrast.
Scan: Use the Advanced Settings tab to lighten, darken, or
adjust contrast.
Copy: Use the Image Quality settings to adjust color balance.
Scan: Confirm that the correct Original Type is set.