Power Management - SNBC BTP-L580IIC User Manual

BTP-L580IIC User's Manual

9 Power management

The power management of BTP-L580IIC has four operation modes: off, ready, active, sleep.
Printer will enter ready mode after the printer is turned on or completes printing task;
Printer will enter sleep mode if there is no printing task for 5 minutes in ready mode;
Printer will awake automatically and enter active mode when printing task comes, and will
enter ready mode again after completing the printing task;
Related parameters of power management are as below:
Maximum default delay time of entering sleep mode is less than 5 minutes;
Since the maximum default delay time is less than 5 minutes, BTP-L580IIC does not open the
interface of changing this time to user.
- 21 -