Safety Instructions - SNBC BTP-L580IIC User Manual

Safety instructions

Before installing and using the printer, please read the following items carefully:
Safety warning
1．
Warning Do not touch the cutter of the printer.
Warning The print head is a thermal element and it is at a high temperature during
printing or just after operation, therefore do not touch it or its peripherals for
reasons of safety.
Warning The print head is an ESD-sensitive device. To avoid damage, do not touch
either its printing parts or connecting parts.
Cautions
2．
1) Install the printer on a flat and stable surface;
2) Reserve adequate space around the printer so that convenient operation and
maintenance can be performed;
3) Keep the printer far away from water source, and do not expose the printer to direct
sunlight, strong light and heat;
4) Do not use or store the printer in a place exposed to high temperature, high humidity or
serious pollution;
5) Do not place the printer in a place exposed to vibration or impact;
6) No condensation is allowed to the printer. In case of such condensation, do not turn on
the power until it has completely gone away;
7) Connect the printer power to an appropriate grounding outlet. Avoid sharing one electrical
outlet with large power motors or other devices that may cause the fluctuation of voltage;
8) Disconnect the power when the printer is deemed to idle for a long time;
9) Don't spill water or other electric materials into the printer (e.g. metal). In case this
happens, turn off the power immediately;
10) Do not allow the printer to start printing when there is no recording paper installed;
otherwise the print head and platen roller will be damaged;
11) To ensure quality print and normal lifetime, use recommended paper or its equivalent;
12) Shut down the printer when connecting or disconnecting interfaces to avoid damages to
control board;
13) Set the print darkness to a lower grade as long as the print quality is acceptable. This will
help to keep the print head durable;
14) Do not disassemble the printer without permission of a technician, even for repairing
purpose;
15) Keep this manual safe and at hand for reference purpose.
- 2 -
BTP-L580IIC User's Manual