Wlan Interface - SNBC BTP-L580IIC User Manual

Support parameter configuration
Support firmware online update
Support printer status query and interface module maintenance based on HTTP (only
supported by JK-E02 interface, not supported by JK-E04 interface).
2) Interface signal definition
Interface adopts 10BASE-T standard in accordance with IEEE802.3. The interface signal is
defined as below:

6.5 WLAN interface

1) Interface features
Support 802.11b, 802.11g communication
Support 9100 port printing, LPR printing
Support status back
Support parameter configuration
Support firmware online update
Support HTTP function
Supported protocols
2)
IP
ARP
ICMP
TCP
UDP
DHCP
TFTP
HTTP
Wireless interface module uses wireless USB network card. For the main technical
specifications, please contact your local dealer or SNBC.
Pin Signal name
1 TX+
2 TX-
3 RX+
4 NC
5 NC
6 RX-
7 NC
8 NC
Table 6.4-1 Interface module pin list
Figure 6.4-1 Interface connector
Explanation
Data transmission +
Data transmission -
Data receiving +
Reserve
Reserve
Data receiving -
Reserve
Reserve
- 17 -
BTP-L580IIC User's Manual