Disassemble The Cutter Still Blade And Platen Roller; Disassemble The Cutter - SNBC BTP-R880NPI Service Manual

4.2.6 Disassemble the cutter still blade and platen roller

1.
2.
3.

4.2.7 Disassemble the cutter

1.
Disassemble the two M2.5*4 screws fixing the still
blade shrapnel and take it off.
Take the still blade out of the still blade Fixed column.
Disassemble the two "E" rings fixing roller bracket, take
the roller shaft sheath out of it and take the platen roller
off.
Disassemble the two M3*5 screws which fix the cutter
module, and remove the cutter from the mechanism
bracket.
- 15 -
BTP-R880NPII Service Manual