Caution:
When the printer is bound to idle for a long period of time, disconnect the power cord.
When the power is burned out or cannot be used for other reasons, replace it according to
the following steps:
1) Press the power cover board and take it off in the direction indicated by the arrow;
2) Pull the plug out of the printer and move the power in the direction indicated by the
arrow until it cannot be moved;
3) Take the power out;
4) Replace the power with a new one in reverse order.
4.4 Connect interface cable
1) Ensure the power switch is turned off;
2) Insert the interface cable (
suitable interface and fix the plug (screw or latch
spring);
3) Connect the other end of the interface cable to the host.
4.5 Connect USB cable
1) Ensure the power switch is turned off;
2) Insert the USB cable (Ⅱ in the figure) into the USB
interface;
3) Connect the other end of the interface cable to the host.
4.6 Connect cash drawer cable
1) Ensure the printer power is turned off.
2) Insert the cash drawer cable (
the printer.
Caution:
Cash drawer interface can be connected only with a cash drawer device (cannot be
connected with a telephone line, etc.).
in the figure) into the
Ⅰ
in the figure) into the cash drawer interface on the back of
Ⅲ
- 9 -
BTP-L580IIC User's Manual