General Safety Instruction - SNBC BTP-R580 User Manual

General Safety Instruction

Before installing and using the printer, please read the following items carefully:
1．
Safety Instructions
Caution: Do not touch the cutter of the printer.
Heating: The print head is at a high temperature during
Warning: The print head is an ESD-sensitive device. To avoid damage, do not touch
2． Caution
1) Install the printer on a flat and stable surface.
2) Reserve adequate space around the printer so that convenient operation and maintenance
can be performed.
3) Keep the printer away from water source, direct sunlight, strong light and heat.
4) Do not use or store the printer in a place exposed to heat or fire, moisture or other pollution.
5) Do not place the printer in a place exposed to vibration or impact.
6) No dew condensation is allowed to the printer. In case of such condensation, do not turn on
the power until it has completely gone away.
7) Connect the power cord to an appropriate grounding outlet. Avoid sharing a single electrical
outlet with large power motors and other devices that may cause the fluctuation in voltage.
8) Disconnect the power cord if the printer is idle for a long time.
9) Do not spill water or other electric substances (like metal) on the printer. If this happens, turn
off the power immediately.
10) Do not allow the printer to start printing when there is no recording paper installed, otherwise
the print head and platen roller will be damaged.
11) To ensure quality print and normal lifetime, use recommended or good quality paper.
12) Shut down the printer when connecting or disconnecting interface connectors to avoid
damage to the control board.
13) Set the print darkness to a lower grade as long as the print quality is acceptable. This will
help to keep the print head durable.
14) The printer should only be disassembled or repaired by a technician, who is certified by
SNBC.
15) Keep this manual safe and at hand for reference purpose.
operation. Do not touch it and its peripherals for reasons of safety.
either its printing parts or connecting parts.
- 3 -
BTP-R580 User's Manual
printing or just after