General Safety Information - SNBC BTP-2002NP User Manual

General Safety Information

Before installing and using the printer, please read the following items carefully:
1. Safety instructions
Do not touch the cutter and tear-off bar of the printer.
The print head is a thermal element and it is at a high temperature during printing or just after
operation, do not touch it and its peripherals for reasons of safety
The print head is an ESD-sensitive device. To prevent damage, do not touch either its
printing parts or connecting parts.
2. Caution
1) Install the printer on a flat and stable surface.
2) Reserve adequate space around the printer so that convenient operation and maintenance can be
performed.
3) Keep the printer away from water source, direct sunlight, strong light and heat.
4) Do not use or store the printer in a place exposed to heat or fire, moisture or other pollution.
5) Do not place the printer on a surface exposed to vibration or risk from impact.
6) Avoid exposing the printer to condensation. In case of condensation, ensure it has been
completely removed before turn on the power.
7) Connect the power adaptor to an appropriate ground outlet. Avoid sharing a single electrical outlet
with large power motors and other devices that may cause the fluctuation in voltage.
8) Disconnect the power adapter if the printer is idle for a long time.
9) Do not spill water or other electric substances (like metal) on the printer. If this happens, turn off
the power immediately.
10) Do not allow the printer to start printing when there is no paper, otherwise the print head and platen
roller will be damaged.
11) To ensure print quality and normal lifetime, use recommended or good quality paper.
12) Shut down the printer when connecting or disconnecting interface connectors to avoid damage to
the control board.
13) Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to
keep the print head durable.
14) The printer should only be disassembled or repaired by a technician, who is certified by SNBC.
- 1 -
User's Manual
BTP-2002NP
.