Power Management - SNBC BTP-R180II User Manual

BTP-R180II User's Manual

9 Power Management

The power management of BTP-R180II has four operation modes: Ready, Active, Sleep, Off.
1. Printer will enter into Ready mode after powering on printer or completing printing job.
2. Printer will enter into Sleep mode if there is not any printing job for 5 minutes in Ready mode.
3. Printer will awake automatically and enter into Active mode when printing job comes, and will enter into
Ready mode again after completing printing job.
Relating Parameter of power management is as below: Maximum Default Delay Times < 5min
Because the Maximum Default Delay Times is less than 5 minutes, BTP-R180II does not open the port of
changing this time to end user.
- 22 -