Arctic Cat 2012 DVX 90 Service Manual page 78

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
4. Route the control cables and wiring through the
metal loop on the steering post.
5. Install the body panel and gas tank cap.
6. Install handlebar with marks aligned with the handle-
bar mounting clamps. Install the caps; then tighten
the cap screws to 10 ft-lb.
www.mymowerparts.com
7. Install the control cables onto the handlebar.
8. Make sure the cables (brake and throttle) are routed
MD2135
down and away so there is no sticking or binding.
Make sure there is maximum right/left steering capabil-
ity and the brake and throttle cables are not affected.
MD2405
KM060A
MD2429
Manual
Table of Contents
! WARNING
MD2439
MD2105
MD2441
MD2106
77