Configuring Guest Access; Registering With The Guest Access - Fritz! 450E Installation Instructions Manual

Configuring Guest Access

12.3 Configuring Guest Access
Default Setting
When the FRITZ!WLAN Repeater connects with the FRITZ!Box,
the switching schedule of the FRITZ!Box is adopted automati-
cally. You can disable this setting and set up a separate guest
access for the FRITZ!WLAN Repeater.
Configuring Guest Access
1.
2.
3.
4.
5.
6.
12.4

Registering with the Guest Access

There are different ways for wireless devices to register with
the guest access.
Manually Registering a Wireless Device with the Wireless
Guest Access
1.
2.
The wireless LAN connection will be established.
Registering a Wireless Device with the Wireless Guest Access
via QR Code
1.
2.
FRITZ!WLAN Repeater 450E
Open the FRITZ!WLAN Repeater user interface (see
page 21).
Select "WLAN / Guest Access".
To set up a separate guest access for the
FRITZ!WLAN Repeater, disable the "Adopt settings for
guest access from the FRITZ!Box" checkbox.
Enable the checkbox "Guest access enabled".
Set up the guest access.
Click "Apply".
Your guest starts the wireless LAN software of her or his
wireless device and searches for the guest network.
Your guests authorize themselves using the network key
you assigned.
Open the FRITZ!WLAN Repeater user interface (see
page 21).
Print out the QR code for your guest.
32