Security And Handling - Fritz! 450E Installation Instructions Manual

Security and Handling

2.2 Security and Handling
When working with the FRITZ!WLAN Repeater, be sure to ob-
serve the following security instructions in order to protect
yourself and the FRITZ!WLAN Repeater from harm.
•
•
•
•
•
FRITZ!WLAN Repeater 450E
The FRITZ!WLAN Repeater has no On/Off switch. This
means it must be possible to disconnect the
FRITZ!WLAN Repeater from the power supply at any time.
– Insert the the FRITZ!WLAN Repeater into an electrical
outlet that is easy to reach.
Moisture and liquids that find their way into the
FRITZ!WLAN Repeater can cause electric shocks or short
circuits.
–
Only use the FRITZ!WLAN Repeater indoors.
– Never let liquids get inside the FRITZ!WLAN Repeater.
The device contains hazardous components and should
only be opened by authorized repair technicians.
– Do not open the FRITZ!WLAN Repeater housing.
– If the FRITZ!WLAN Repeater needs to be repaired,
please take it to a specialized vendor.
During electrical storms, lightning and electrical surges
present a danger to connected electrical devices.
– Do not install the FRITZ!WLAN Repeater during an
electrical storm.
– During a storm, disconnect the FRITZ!WLAN Repeater
from the power supply.
Heat accumulation can lead to overheating of the
FRITZ!WLAN Repeater and subsequently damage the
FRITZ!WLAN Repeater.
– Provide for sufficient air circulation around the
FRITZ!WLAN Repeater.
– Make sure that the ventilation slits on the
FRITZ!WLAN Repeater housing are always unobstructed.
– Do not cover the FRITZ!WLAN Repeater.
10