No Connection With The Wireless Access Point - Fritz! DVB-C Installation And Operation Manual

No Connection with the Wireless Access Point

Cause
The device on which you are receiving the TV program is con-
nected with the wireless access point and not with the
FRITZ!WLAN Repeater. This makes the runtime of the DVB-C
signal quite long.
Help
Configure a different radio network name (SSID) in the
FRITZ!WLAN Repeater than in the wireless access point; see
page
network of the FRITZ!WLAN Repeater on the device you use to
receive the TV program.
14.5 No Connection with the Wireless Access Point
Cannot establish a wireless LAN connection between the
FRITZ!WLAN Repeater and your wireless access point.
Cause
The FRITZ!WLAN Repeater is located outside the wireless LAN
range of your access point.
Help
Reduce the distance between the two devices. Connect the
FRITZ!WLAN Repeater to an outlet in another location.
Cause
The wireless LAN function of your wireless access point is dis-
abled.
Help
Enable the wireless LAN function.
FRITZ!WLAN Repeater DVB-C
29. Then establish a wireless connection with the radio
35