Performing An Update With The Wizard - Fritz! 450E Installation Instructions Manual

Performing an Update with the Wizard

Configuring
1.
2.
3.
4.
This concludes the configuration of the auto-update feature.
You can also request notification about new updates by e-
mail; see
page
10.2 Performing an Update with the Wizard
For updating the FRITZ!WLAN Repeater there is a wizard in the
FRITZ!WLAN Repeater user interface. The wizard checks
whether an update of the FRITZ!OS is available for your
FRITZ!Box and guides you step by step through installation.
Performing the Update
1.
2.
3.

The FRITZ!OS update is complete when the "Power" LED stops
flashing.
FRITZ!WLAN Repeater 450E
Automatic
Open the FRITZ!WLAN Repeater user interface
(see page 21).
Select the "System / Update" menu and click on the
"Auto-Update" tab.
Select the desired auto-updating option.
Click on "Auto-Update".
Push Services: Using Notification Services
24.
Open the FRITZ!WLAN Repeater user interface
(see page 21).
On the "Overview" page, select the "Wizards" menu.
Start the "Update FRITZ!OS" wizard.
The wizard checks whether a new FRITZ!OS update is
available for your FRITZ!WLAN Repeater.
To transfer a new FRITZ!OS to the FRITZ!WLAN Repeater,
click "Start Update".
The FRITZ!OS update begins and the "Power" LED on the
FRITZ!WLAN Repeater starts flashing.
Interrupting the FRITZ!OS update can damage the
FRITZ!WLAN Repeater. Do not interrupt the power supply
to the FRITZ!WLAN Repeater during the update!
27
Update
from