Table of Contents
Advertisement
No Connection with the Wireless Access Point
Cause
You are attempting to register the FRITZ!WLAN Repeater at
your wireless access point using WDS (Wireless Distribution
System).
Help
The FRITZ!WLAN Repeater does not support WDS. For instruc-
tions on connecting the FRITZ!WLAN Repeater with your wire-
less access point, see
Cause
Another wireless radio network in the vicinity is causing inter-
ference.
Help
Test a different radio channel. If possible, set automatic radio
channel selection in the wireless access point.
Cannot establish a wireless LAN connection between the
FRITZ!WLAN Repeater and the wireless LAN access point via
WPS.
Cause
The connection via WPS failed.
Help
Start the connection procedure again (see
reless LAN Connection Using WPS
Cause
The "LAN Bridge" operating mode is set in the
FRITZ!WLAN Repeater. In this mode the wireless LAN access
point can only be connected using a LAN cable. In this operat-
ing mode you can use WPS only to connect wireless devices
like notebooks and smartphones with the FRITZ!WLAN Re-
peater.
Help
FRITZ!WLAN Repeater 450E
page
12.
from
39
Establishing a Wi-
page
12).
Hide quick links:
Advertisement
Table of Contents
