Fritz! 450E Installation Instructions Manual page 8

Button and LEDs
Button
The following functions are operated using the button:
Function
Switches wireless LAN on and off
Starts a WPS Quick Connection
Restores the repeater to factory set-
tings
LEDs
LED
Signal
strength
Power
WLAN
LAN
All
FRITZ!WLAN Repeater 450E
Condition Meaning
flashing
•
•
on The more LEDs are lit up, the stronger the
connection with the wireless access point
In the "LAN Bridge" mode: signal strength
of the connection with the first registered
wireless LAN device
flashing
•
•
on FRITZ!WLAN Repeater is ready for opera-
tion
flashing
•
•
•
flashing WPS aborted. More than two wireless de-
rapidly vices are performing WPS at the same
time. Restart WPS.
on Wireless LAN is enabled
on A network connection has been estab-
lished to a connected network device
flashing Loading factory settings
8
Press for at least ...
1 second
6 seconds
15 seconds
Searching for wireless access point
No connection with the wireless ac-
cess point
FRITZ!WLAN Repeater starts
Updating the firmware of the
FRITZ!WLAN Repeater
FRITZ!WLAN Repeater adopts wireless
LAN settings
Switching wireless radio network on or
off
Performing WPS