Main Fuse - Permobil K300 Service Manual

Fuses
Fuses

Main Fuse

The main fuse is located in its holder inside the
front battery cover.
m
nOTE
If the main fuse blows, there is often a major electrical fault. The
cause of the fault should be checked carefully before the fuse
is replaced.
Replacing the Main Fuse
1. Switch off the main power switch on the control
panel.
2. Remove the front battery cover. See page 9.
3. Unscrew and disassemble the fuse holder.
4. Replace the fuse.
5. Screw the fuse holder back together.
6. Place the fuse holder on the top of the front
battery, at the rear edge of the battery.
7. Refit the front battery cover. See page 9.
Replacing the Main Fuse Holder
1. Switch off the main power switch on the control
panel.
2. Remove the front battery cover. See page 9.
3. Unscrew and disassemble the fuse holder.
4. Detach the cables from the fuse holder by
unscrewing the screws. See figure.
5. Connect the cables to the new holder.
6. Fit the fuse and screw the holder together.
m
nOTE
Check that the cables are firmly attached.
7. Place the fuse holder in the intended place
on the front battery.
8. Refit the front battery cover. See page 9.
The main fuse holder.
Main Fuse cable connection.
42