Output stage VR2
Removal
1. Switch off the main power switch on the control panel.
2. Remove the chassis covers. See page 8.
3. Disconnect the electrical connections from the output stage. Note their positions (see illustration
below).
Motor 1
Links
4. Remove the output stage by unscrewing its two
mounting screws. See the figure. On a chassis
fitted with lights, remove the lights module. See
page 40.
assembly
Assemble in the reverse order.
Accu
Kabelaansluitingen powermodule (VR2).
39
Motor 2
Rechts
The output stage is fitted with two screws.
Output stage
Bedieningspaneel
Inhibit
Extern
laadcontact
Stelmechanisme