Front Wheels - Permobil K300 Service Manual

Front wheels

Front wheels
Removal
1. Switch off the main power switch on the control panel.
2. Lift up and chock up the wheelchair chassis so that the wheel in question is free of the ground.
3. Remove the hub cap by pulling it straight out. If necessary, carefully lever it out using a screwdriver
in the slot on the cap.
4. Remove the four screws that hold the wheel in place.
m
WaRnIng
The central screw must not be removed.
5. Remove the wheel by pulling it straight out.
assembly
Assemble in the reverse order.
Tighten the four screws using a dynamometric wrench.
Tightening torque 24 nm.
Item Description
1 Hub cap
2
Screw, ISO 4762 M8x20 8.8 Fe/Zn 5 C1
3 Rear wheels
1
2
Fitting/removing front wheels.
12
3