Permobil K300 Service Manual page 13

Front wheels
Taking the rim apart
The rim can be taken apart to make it possible to fit/remove solid or pneumatic tires.
1. Remove the wheel in question from the wheelchair. See the previous page.
2. If the tire is pneumatic, release the air.
m
WaRnIng
Ensure that pneumatic tires are not pressurized before the rim is taken apart, otherwise there is a risk of personal injury.
3. Remove the six screws holding the two halves of the rim together (see illustration).
4. Take the rim apart.
assembly
Assemble in the reverse order.
Tighten the six screws using a dynamometric wrench.
Tightening torque: 22 nm.
m
WaRnIng
The recommended tire pressure for pneumatic tires is 200 kPa (2 bar). Overfilling entails a risk of explosion.
Incorrect tire pressure may result in lower stability and maneuverability. Check regularly that the tires have the correct pressure.
1 2
Fitting a solid tire to a split rim.
13
3
Item Description
1 Rim, outer section
2
Tire
3 Rim, outer section
4
Screw, ISO 4762 M8x30 8.8 Fe/Zn 5 C1
Front wheels
4