Control Panel Rnet - Permobil K300 Service Manual

Control panel
Control panel R-net
Removal
1. Switch off the main power switch on the
control panel.
2. Remove the cable ties holding the control
panel cabling in place under the arm rest. Note
the positions of the cable ties for subsequent
fitting.
3. Divide the control panel cabling at the contact
on the cabling.
4. Remove the control panel (1). It is held in
place with two screws (see illustration). These
two screws also hold the bracket for the ICS
control panel (2), if there is one fitted (see
illustration).
assembly
Assemble in the reverse order.
1
The control panel is held in place with two screws.
36
2