Setting the time program for DHW heating
6. / for the day of the week with the
required time program, e.g. "Mon-
day".
7. "Copy".
Time program DHW
Saturday
05:30
-
09:00
10:00
-
12:00
--:--
-
--:--
Heating circuit 1
Deleting a time phase
Set the time for the end point to the same
time that was set for the start point. The
display shows the selected time phase
"- - : - -".
One-off DHW heating outside the time program
Note
At least one heating circuit of your sys-
tem must not be in the operating pro-
gram
"Standby mode".
Standard menu
1. "Heating circuit 1", "Heating circuit
2" or "Heating circuit 3".
2.
for "Party mode".
Heating system with DHW circulation pump
For further information about the DHW
circulation pump, see chapter "Terminol-
ogy".
Factory setting (Vitotronic control unit):
"Automatic"
Copy
Standard
Standard
(cont.)
8. Select the days for which you would
like to adopt the time program, e.g.
"Tu", "We", "Th", "Fr".
Copy time program
Select the days that the time program
should adopt.
Tu
Mo
We
Heating circuit 1
9. "OK" to confirm.
3. Press "OK" twice to confirm.
The
button becomes lighter.
4.
to disable "Party mode" to prevent
unintentional central heating with
standard room temperature (the but-
ton darkens).
DHW heating
Sa
Th
Fr
Su
OK
29