Help; Standard Menu - Viessmann VITOTROL 300 RF Operating Instructions Manual

Controls and symbols
The Vitotrol 300 RF is running off the
power supply unit.
The Vitotrol 300 RF is running off the
power supply unit and the batteries
are being charged.

Help

1. Press
to call up the Help.
You will be supplied with additional
information relating to the selected
menu.
2. Press
again to exit the Help.

Standard menu

There are two control levels available,
the "standard menu" (see the following
chapter) and the "extended menu" (see
page 13).
You can scan and adjust the settings
you use most frequently from the
standard menu:
■ Set room temperature
■ Operating program
■ Heating circuit selection
■ Comfort function
■ Energy saving function
mode"
(cont.)
"Party mode"
"Economy
Reports:
Fault message
Service message
Help
Show explanations of
the current menu item.
Standby mode
Only DHW
DHW and heating
Call up the standard menu as follows:
■ If the standard display is active (see
page 14):
Touch the display.
■ If you are somewhere in the menu:
Press .
About the controls
11