Deleting A Time Phase; Stopping The Central Heating - Viessmann VITOTROL 300 RF Operating Instructions Manual

Central heating
Setting the time program for central heating
5. / for the day of the week with the
required time program, e.g. "Mon-
day".
6. "Copy".
Heating time program
Saturday
05:30 - 09:00
10:00 - 12:00
--:-- - --:--
Heating circuit 1

Deleting a time phase

Set the time for the end point to the same
time that was set for the start point. The
display shows the selected time phase
"- - : - -".

Stopping the central heating

Standard menu
1. "Heating circuit 1", "Heating circuit
2" or "Heating circuit 3".
2. .
3. Select the operating program
"Only DHW" (summer mode, no cen-
tral heating)
or
"Standby mode" (frost protection
monitoring is enabled for the boiler
and DHW cylinder).
4. "OK" to confirm.
22
Copy
Standard
Standard
(cont.)
7. Select the days for which you would
like to adopt the time program, e.g.
"Tu", "We", "Th", "Fr".
Copy time program
Select the days that the time program
should adopt.
Mo Tu We
Heating circuit 1
8. "OK" to confirm.
Th Fr Sa Su
OK