About The Controls; Operating Information; Controls And Symbols - Viessmann VITOTROL 300 RF Operating Instructions Manual

Wireless remote control for one, two or three heating circuits

Hide thumbs Also See for VITOTROL 300 RF:

Installation and service instructions manual (28 pages)

Installation and service instructions for contractors (32 pages)

Table Of Contents

Table of Contents

Operating information

The Vitotrol 300 RF remote control can

also be taken out of its table-top dock or

wall mounting bracket and used to make

adjustments.

"Mobile test location" appears on the

display.

The room temperature sensor built into

the Vitotrol 300 RF captures the temper-

ature.

While you are holding the

Vitotrol 300 RF in your hands, for exam-

ple, the displayed room temperature

begins to rise (actual room temperature,

see page 12).

However, the Vitotronic control unit oper-

ates on the basis of the room tempera-

ture value that it received before the

Vitotrol 300 RF was removed from its

holder.

If the Vitotrol 300 RF has been out of its

holder for 5 min and has not been used,

an acoustic signal will sound every 30 s.

However, if the remote control is used

during this time, the time counter is

reset.

Controls and symbols

Wednesday 25.05.2011 13:42

20.5°

14°

Heating circuit 1

The Vitotrol 300 RF remote control is fit-

ted with a touchscreen. To make adjust-

ments and scans, press the on-screen

buttons.

Once you have finished using the

Vitotrol 300 RF, return it to its table-top

dock or wall mounting bracket.

This ensures that the batteries are

always charged.

The Vitotrol 300 RF enables the follow-

ing adjustments to be made from the liv-

ing space:

■ Standard room temperature

■ Reduced room temperature

■ DHW temperature

■ Operating and holiday program

■ Time phases for central heating

■ Time phases for DHW heating

■ Time phases for the DHW circulation

pump (if installed)

■ Date and time

All other settings are transferred from the

Vitotrol 300 RF to the Vitotronic control

unit and vice-versa. The most recent

adjustments always apply to the relevant

heating circuit.

The symbols are not permanently dis-

played, but appear subject to the system

version and the operating state.

Note

Radio transmission can take some time,

so there may be a delay in the display of

symbols.