Central Heating; Required Settings (Central Heating); Selecting A Heating Circuit - Viessmann VITOTROL 300 RF Operating Instructions Manual

Central heating

Required settings (central heating)

If you want central heating, check the
following points:
■ Have you selected the heating circuit?
For settings, see page 12 or the next
chapter.
■ Have you set the required room tem-
perature?
For settings, see page 12 or 19.

Selecting a heating circuit

Heating can, if necessary, be split over
several heating circuits.
■ If you are using your remote control to
control several heating circuits, for all
central heating settings, first select
the heating circuit for which you want
to make a change.
■ If you are only controlling one heating
circuit, this option is not available.
Example:
■ "Heating circuit 1" is the heating cir-
cuit for the rooms occupied by you.
■ "Heating circuit 2" is the heating cir-
cuit for the rooms of a separate apart-
ment.
Wednesday 25.05.2011 13:42
20.5°
14°
Heating circuit 1 2 3
18
■ Have you selected the correct operat-
ing program?
For settings, see page 12 or 20.
■ Have you set the required time pro-
gram?
For settings, see page 13.
Note
In the factory setting, the heating circuits
are designated "Heating circuit 1"
"Heating circuit 2" and "Heating cir-
cuit 3".
Menu