Setting The Time - Viessmann F remote control Operating Instructions Manual

Operation, settings and adjustments

6 Setting the time

The day and the time are preset in the factory and are
continuously updated by a built-in long-life battery.
Normally, especially when using the radio clock module
(not available for GB), it is not necessary to set the time.
Should you nevertheless wish to change the time setting,
please follow this procedure:
1. Press the "
The clock symbol appears in the display and the current
time is indicated.
2. At the same time, turn the "
the required time is set.
3. Release the "
The required time is accepted.
Please note:
Resetting to summer/winter time always takes place auto
matically. If the starting dates for summer/winter time are
changed, please contact your heating contractor.
If you should change the time when using the radio clock
module, the radio clock symbol "
extinguished until the time is successfully synchronized
again.
(This does not apply in GB)
If the time is adjusted beyond 0.00 hrs, the current day is
changed.
14
Dokument: - page 5 (Black)
Screen angle and frequency: 45.0000, <default>
" button.
" button.
" selector knob until
" in the display will be