Dhw Heating; Required Settings (Dhw Heating); Setting The Dhw Temperature; Setting The Operating Program For Dhw Heating - Viessmann VITOTROL 300 RF Operating Instructions Manual

DHW heating

Required settings (DHW heating)

If you want DHW heating, check the fol-
lowing points:
■ Have you selected the required set
DHW temperature?
For setting, see the next chapter.
■ Have you selected the correct operat-
ing program?
For setting, see page 12 or 26.

Setting the DHW temperature

Factory setting (Vitotronic control unit):
50 °C
Extended menu
1. "Menu"
2. "DHW"

Setting the operating program for DHW heating

Factory setting (Vitotronic control unit):
"Heating and DHW"
Note
DHW heating applies to all heating cir-
cuits. If you want to change this, contact
your local heating contractor.
26
■ Have you set the required time pro-
gram?
For setting, see page 27.
3. "Set DHW temperature"
4. +/– for the required value.
5. "OK" to confirm.
Standard menu
1. "Heating circuit 1", "Heating circuit
2" or "Heating circuit 3".
2. or or
operating program is active.
Wednesday 25.05.2011 13:42
14°
Heating circuit 1
depending on which
20.5°
Menu