Yamaha cvp-701 clavinova Reference Manual page 47

2
Specify the target channel and part for recording.
2-1
While holding down the SONG CONTROL [REC] button, press the [1] – [8] buttons to
specify the desired channels (9 – 16) for recording.
As the default setting, Style parts (Rythm1-Phrase 2) are assigned to channels 9 – 16 as illustrated
on page 49. You can change the parts to be recorded by performing step 2-2.
2-2
Select the desired part which will be recorded to the channel specified in step 2-1 by using
the [C]/[D] buttons.
To cancel the recording, press the SONG CONTROL [STOP] button.
3
Press the STYLE [SYNC START] button, then play the style by specifying the chords in
the chord section.
Recording begins automatically as soon as you play the Style. You can also start recording by pressing
SONG CONTROL [PLAY/PAUSE] button. Perform as desired, playing the Style by changing chords and/
or sections.
Make sure that the STYLE [ACMP ON/OFF] button is turned on.
4
After you finish your performance, press the SONG CONTROL [STOP] button to stop
recording.
5
To hear the recorded performance, press the SONG CONTROL [PLAY/PAUSE] button.
This finishes recording of the Style. Now, let's record a melody to channel 1.
2-2
2-1
Chord section
♯
Split Point (F 2 as default)
CVP-701 Reference Manual
5
47