Config2 - Yamaha cvp-701 clavinova Reference Manual

CONFIG2

Call up the operation display.
[FUNCTION] → TAB [L][R] MENU1 → [J] UTILITY → TAB [L][R] CONFIG2
1 Speaker-related settings
[1]/
[2]
[3]/
[4]
12
[5]/
[6]
[7]
[8]
102
CVP-701 Reference Manual
Select the desired parameter:
1 Speaker
2 Voice Category Button
Options/Display-related Set-
tings
SPEAKER
STEREOPHONIC
OPTIMIZER
AUX IN NOISE
GATE
I.A. CONTROL
ON/OFF
I.A. CONTROL
DEPTH
Determines whether or not the speaker will sound.
HEADPHONE SW
Speaker sounds normally, but is cut off when headphones are inserted
to the PHONES jack.
ON:
Speaker sound is always on.
OFF:
Speaker sound is off. You can only hear the instrument sound via the
headphones.
Turns the Stereophonic Optimizer on or off.
• On......This function is effective on the VRM Voices sounded from
the headphone(s) connected to the [PHONE] jack(s).
In case the "Speaker" setting above is "On" and headphone(s) are connected to
the [PHONES] jack(s), this function is effective on the VRM Voices from the
headphone(s) as well as from the speakers of the instrument.
In case the headphone(s) are connected to the [PHONES] jack(s) and external
audio devices are connected to the AUX OUT[L/L+R]/[R] jacks, this function is
effective on the VRM Voices from the headphone(s) as well as from the audio
devices.
• Off .....The effect of Stereophonic Optimizer is not applied.
This effect mutes the input signal when the input from the AUX IN
falls below a specified level.
I.A. Control (Intelligent Acoustic Control) is a function which auto-
matically adjusts and controls the sound quality according to the over-
all volume of the instrument. Even when the volume is low, it permits
both low sounds and high sounds to be clearly heard. I.A. Control is
effective only from the sound output of the instrument speakers.
This sets the depth of the I.A. Control. The higher the value, the more
clearly that low and high sounds are heard at lower volume levels.