The Yamaha CVP-701 uses the following button names and functions:

1. [FUNCTION] – Opens the function menu for various settings.
2. TAB [(–)][(+)] – Scrolls through menu tabs.
3. [G] (SYSTEM) – Accesses system settings, such as owner name display.
4. [J] (UTILITY) – Opens the utility menu for configuration options like display brightness.
5. [A] SPLIT POINT/CHORD FINGERING – Opens the split point and chord fingering settings.
6. [A] – [J] buttons – Used to select specific items or perform operations in menus.
7. [1▲]/[1▼] – [8▲]/[8▼] buttons – Used to change settings or navigate parameters.
8. [4▲]/[4▼], [5▲]/[5▼] buttons – Used to select items like language or adjust brightness.

These buttons allow users to navigate menus, adjust settings, and customize the instrument’s functions.

This answer is automatically generated

Summary of Contents for Yamaha CLAVINOVA CVP-701

Page 1 For information on assembling the instrument, refer to the instructions on page 113. Nous vous remercions d'avoir choisi le Clavinova de Yamaha ! Nous vous conseillons de lire attentivement ce mode d'emploi aﬁn de tirer pleinement proﬁt des fonctions avancées et pratiques de votre instrument.
Page 2: Special Message Section
Implied warranties may also be affected. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.
Page 3 Compliance with FCC regulations * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B) IMPORTANT NOTICE FOR THE UNITED KINGDOM COMPLIANCE INFORMATION STATEMENT...
Page 4: Important Safety Instructions
Explanation of Graphical Symbols The lightning flash with arrowhead symbol CAU TION within an equilateral triangle is intended to alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK DO NOT OPEN “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 5: Precautions
If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Water warning • Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings.
Page 6 Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use.
Page 7: Notice
• This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use others’ copyrights. Due to copyright laws and other relevant laws, you are NOT allowed to distribute media in which these contents are saved or recorded and remain virtually the same or very similar to those in the product.
Page 8: About This Manual
Voice selection, expanded Voice parameters, and integrated effect processing. XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha specifically to provide more Voices and variations, as well as greater expressive control over Voices and effects, and to ensure compatibility of data well into the future.
Page 9: About The Manuals
Contains both the MIDI Data Format and the MIDI Implementation Chart, which allow you to confirm MIDI messages transmitted/recognized by this instrument. To obtain these manuals, access the Yamaha Downloads website, select your country, enter “CVP-701” in the Model Name box, then click [Search].
Page 10: Table Of Contents
Contents 1 Piano Room – Enjoying Piano PRECAUTIONS ..........5 Performance – NOTICE..............7 Information ............7 Playing a Piano Performance in Piano Room ................40 About the Manuals ..........9 Playing the Piano in Session with Other Included Accessories ..........9 Instruments ............41 Changing/Resetting the Piano Room Settings .
Page 11 Adjusting the Volume Balance Between Style 9 Registration Memory – Saving and and Keyboard ........... 68 Recalling Custom Panel Setups – Changing the Split Points ....... 69 Registering Your Panel Setups ....... 97 Saving the Registration Memory as a Bank File 4 Song Playback –...
Page 12: Welcome To Clavinova
Welcome to Clavinova True Acoustic Piano Feel This instrument features gorgeous piano Voices, created with samples of the Yamaha CFX flagship concert grand piano and the famous Bösendorfer* concert grand piano, as well as a special keyboard to fully reproduce the natural touch response and expressive nuances of an actual concert grand piano, including rapid repetitive capability.
Page 13 Full Backing Band Accompaniment Even if you’re playing alone, the CVP can put an entire backing band behind you! Simply playing chords automatically triggers and controls the auto accompaniment backing (Style function). Select an accompaniment Style — such as pop, jazz, Latin, and various other music genres in the world —...
Page 14: Panel Controls
Panel Controls A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 Panel Setup (Panel Settings) By using the controls on the panel, you can make various settings such as selecting a Voice or Style, tuning the pitch, and so on. These settings of the instrument are together referred to as “panel setup”...
Page 15 & & F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7 Music rest page 16 Guide lamps Key cover page 76 page 16 ] (Standby/On) switch page 18 I/O connectors...
Page 16: Starting Up
Starting Up Opening/Closing the Key Cover When opening the key cover, lift the cover slightly, then push and slide it open. When closing the key cover, slide the cover toward you and gently lower the cover over the keys. CAUTION Be careful to avoid catching your fingers when opening/closing the cover.
Page 17: Power Supply
To lower the music rest: Pull the music rest toward yourself as far as it will go. Raise the two metal supports (at the rear of the music rest). Gently lower the music rest backward until it is all the way down. Power Supply Connect the plugs of the power cord in the order shown in the illustration.
Page 18: Turning On/Off The Power
Turning On/Off the Power Turn down the [MASTER VOLUME] dial to “MIN.” Press the [P] (Standby/On) switch to turn the power on. The display and the power indicator located below the left end of the keyboard lights up. Adjust the volume as desired while playing the keyboard. The power indicator lights up.
Page 19: Adjusting The Master Volume
 Disabling Auto Power Off (simple method) Turn the power on while holding down the lowest key on the keyboard. A message appears briefly, then the instrument starts up with the Auto Power Off is disabled. For details on how to set the desired Auto Power Off time, refer to the Reference Manual on the website (page 9), Chapter 12.
Page 20: Using Headphones
Using Headphones Standard stereo phone plug Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either of these jacks. CAUTION Do not use the headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss.
Page 21: Changing The Display Language
Throughout this manual, arrows are used in the instructions, indicating in shorthand the process of calling up certain displays and functions. Changing the Display Language This determines the language used in the display for messages, file names, and character input. Call up the operation display.
Page 22: Showing The Owner Name In The Opening Display
Showing the Owner Name in the Opening Display You can have your name appear in the opening display (the display that appears when the power is turned on). Call up the operation display. 1 [FUNCTION] → 2 TAB [L][R] MENU2 → 3 [G] (SYSTEM) → 4 TAB [L][R] OWNER Press the [I] (OWNER NAME) button to call up the Owner Name display.
Page 23: Using The Pedals
Using the Pedals The instrument features three pedals. Soft pedal Sostenuto pedal Damper pedal  Damper pedal (Right) Pressing this pedal lets you sustain notes even after releasing the keys. When you select a Piano Voice compatible with VRM (page 49), pressing this pedal activates the VRM to accurately recreate the unique resonance of an acoustic grand piano’s soundboard and strings.
Page 24: Playing The Demos
Playing the Demos The Demos provide helpful, easy-to-understand introductions to the features and functions as well as sound demonstrations. Press the [DEMO] button to call up the Demo display. Press one of the [A] – [D] buttons to show a specific Demo. Pressing one of the [F] –...
Page 25: Display-Based Controls
Display-based Controls The LCD provides comprehensive at-a-glance information on all current settings. The displayed menu can be selected or changed by the controls around the LCD. TAB [L][R] buttons (page 26) [A] – [E] buttons (see below) [F] – [J] buttons (see below) [DIRECT ACCESS] button (page 28)
Page 26 TAB [L][R] buttons These buttons are used mainly to change the pages of displays that have “tabs” at the top. [1] – [8] buttons The [1] – [8] buttons are used to make selections or adjust settings (up or down correspondingly) for functions shown directly above them.
Page 27 [DATA ENTRY] dial and [ENTER] button Depending on the selected LCD display, the [DATA ENTRY] dial can be used in the following two ways.  Selecting files (Voice, Style, Song, and so on) When one of the File Selection displays (page 30) is shown, you can use the [DATA ENTRY] dial to move the cursor, then press the [ENTER] button to actually select a file.
Page 28: Messages Shown In The Display
Messages Shown in the Display A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. When the message appears, simply press the appropriate button. Instant Selection of the Displays — Direct Access With the convenient Direct Access function, you can instantly call up the desired display — with just a single additional button press.
Page 29: Main Display Configuration
Main Display Configuration The display that appears when the power is turned on is the Main display. The Main display shows the current basic settings such as the currently selected Voice and Style, allowing you to see them at a single glance.
Page 30: File Selection Display Configuration
Audio information Displays information for the selected audio file (file name, time, etc.) When the recording of USB Audio Player/Recorder is in standby, a “REC WAIT” indication appears. While recording, “REC” appears. Registration Sequence Indicates the sequence order of the Registration Memory (if set to on; page 99) numbers, which can be called up via the TAB [L][R] buttons or the pedal.
Page 31 Closing the current folder and calling up the next highest level folder In the PRESET display, several data (files) are contained together in a folder. You can also organize your original data in the USER/USB display by creating several new folders (page 32). To close the current folder and call up the next highest level folder, press the [8] (UP) button.
Page 32: File/Folder Management
File/Folder Management If you’ve saved a lot of files to a USB flash drive or USER drive, it may be difficult to find the desired file quickly. To make it easier to find the files you want, you can organize your files in folders, rename the files, delete unnecessary files, etc.
Page 33 Renaming a File/Folder This operation lets you rename files/folders. NOTE • Files in the PRESET tab cannot be renamed. • The “PianoRoom” folder cannot be renamed. Call up the display containing the file/folder you want to rename. Call up MENU2 at the right bottom of the display by pressing the [8] button as necessary.
Page 34 Copying or Moving Files This operation lets you copy or cut a file and paste it to another location (folder). You can also copy a folder (but not move it) by using the same procedure. Please note that some files have copy/move restrictions. See “Restrictions for protected Songs” on page 73. NOTE Files in the PRESET tab and the “PianoRoom”...
Page 35 Deleting Files/Folders This operation lets you delete a file/folder. NOTE • Files in the PRESET tab cannot be deleted. • The “PianoRoom” folder cannot be deleted. Call up the display containing the file/folder you want to delete. Call up MENU2 at the right bottom of the display by pressing the [8] button as necessary.
Page 36: Entering Characters
Entering Characters The instructions that follow show you how to enter characters for naming your files/folders, inputting keywords, etc. Entering characters is done in the display shown below. Change the type of character by pressing the [1] button.  If you select a language other than Japanese as the Language (page 21), the following different types of characters are available: CASE •...
Page 37 Other character-entry operations  Deleting characters Move the cursor to the character you wish to delete by using the [DATA ENTRY] dial, and press the [7] (DELETE) button. To delete all characters on the line at once, press and hold the [7] (DELETE) button. ...
Page 38: Data Backup
Data Backup This procedure backs up all data stored in USER drive (except Protected Songs) and settings to the USB flash drive as a backup file (extension: bup.). The backup file can be restored to the instrument again, allowing you to recall the panel settings and performance data you created previously. NOTE Before using a USB flash drive, be sure to read “Connecting a USB Device”...
Page 39: Restoring The Factory-Programmed Settings
Restoring the Factory-programmed Settings Restores the System Setup parameters to the original factory settings. Refer to the separate Data List booklet for details on the System Setup parameters, marked with “” in the “System Setup” row in the Parameter Chart list. Turning the power on while holding the right-most key on the keyboard displays a message indicating that initialization is in progress.
Page 40: Performance
Piano Room – Enjoying Piano Performance – The Piano Room function is for those who want to simply, conveniently, and fully enjoy playing the instrument as a piano. No matter what settings you’ve made from the panel, you can instantly call up the optimum settings for piano performance with a single button press.
Page 41: Playing The Piano In Session With Other Instruments
Playing the Piano in Session with Other Instruments Press the [PIANO ROOM] button to call up the Piano Room display. Press the [F] button to call up the Session players in the display. Session players can be shown or hidden by pressing the [F] button. Session players Press the [J] button to start.
Page 42: Changing/Resetting The Piano Room Settings
Changing/Resetting the Piano Room Settings You can change the settings of Piano room, such as touch sensitivity, as you like. You can also restore all Piano Room settings to the default. Press the [Piano Room] button to call up the Piano room display. To change the accompaniment settings, press the [F] button to display the session players.
Page 43: Recording Your Performance In The Piano Room
Recording your Performance in the Piano Room You can record your performance in the Piano Room to the instrument or a USB flash drive. NOTE When you record to the instrument, the method of recording is MIDI. When you record to a USB flash drive, the method of recording is Audio. Refer to page 79 for details on the difference between MIDI and Audio recordings.
Page 44: Playing Preset Voices
Voices – Playing the keyboard – The instrument features a wide variety of exceptionally realistic instrumental Voices, including piano, guitar, strings, brass, wind instruments and more. Playing Preset Voices Selecting a Voice (RIGHT1) and Playing the Keyboard You can play a single Voice over the entire keyboard range. This is used for normal performance—for example, with the piano Voice.
Page 45  To Select XG Voices Refer to the Reference Manual on the website (page 9). Press one of the [A] – [J] buttons to select the desired Voice. To call up the other display pages (P1, P2, etc.), press one of the [1] – [7] buttons or press the same VOICE button again.
Page 46 Press one of the [A] – [J] buttons to select the desired Voice. Play the keyboard. The Voice selected for RIGHT1 (page 44) and the Voice selected here are sounded simultaneously in a layer. Quickly selecting Voices for the Right 1 and 2 parts You can quickly select the Right 1 and 2 part Voices, just from the Voice category selection buttons.
Page 47: Voice Types
Keyboard parts Voices can be assigned independently to each of the three keyboard parts: Right 1, Right 2 and Left. You can combine these parts by using the PART ON/OFF buttons to create a rich, ensemble sound. Upper section of the keyboard Lower section of the keyboard Split Point (F 2) When the LEFT part is off, the RIGHT1 and 2 Voices can be played over the entire keyboard.
Page 48: Calling Up The Piano Default Settings (Piano Reset)
Calling Up the Piano Default Settings (Piano Reset) When you turn the power on, the Voice is set to “CFX Grand, ” allowing you to play the instrument as a piano across the entire keyboard. No matter what settings you’ve made from the panel, you can instantly call up these default settings.
Page 49: Playing The Realistic Resonance-Enhanced Vrm Voices
Playing the Realistic Resonance-enhanced VRM Voices On an actual acoustic piano, if you press the damper pedal and play a key, not only does the string of the pressed key vibrate, it also causes other strings and the soundboard to vibrate, with each influencing the rest, creating a rich and brilliant resonance that sustains and spreads.
Page 50: Playing Super Articulation Voices
Playing Super Articulation Voices Select a Voice having the indication “S.Art!” in the Voice Selection display. Call up MENU1 at the right bottom of the display by pressing the [8] button as necessary. Press the [6] (INFO) button to call up helpful information on how to play the selected S.
Page 51: Applying Voice Effects
Applying Voice Effects The instrument features a sophisticated multi-processor effect system which can add extraordinary depth and expression to your sound. From the Main display, select the desired part for which you want to add effects. Press the [VOICE EFFECT] button to call up the VOICE EFFECT display. Use the [1], [3] –...
Page 52 With the digital effects built into the instrument, you can add [4UD] DSP ambience and depth to your music in a variety of ways. Various [5UD] DSP effect types, such as chorus and delay are included. VARIATION • The DSP switch is used to turn the DSP (Digital Signal Processor) effect on or off for the currently selected keyboard part.
Page 53: Creating Original Organ Flutes Voices
Creating Original Organ Flutes Voices The instrument uses advanced digital technology to recreate the legendary sound of vintage organs. Just as on a traditional organ, you can create your own sound by increasing and decreasing the levels of the flute footages.
Page 54 Alternately turns the vibrato effect for the Organ Flutes Voice VIBRATO OFF ON or OFF. VIBRATO ON VIBRATO Sets the Vibrato depth to one of three levels: 1 (low), 2 (mid), DEPTH or 3 (high). PRESETS Opens the File Selection display of the Organ Flute Voices for selecting a preset Organ Flutes Voice.
Page 55: Setting The Touch Response Of The Keyboard
Setting the Touch Response of the Keyboard You can adjust the touch sensitivity of the instrument (how the sound responds to the way you play the keys). This setting does not change the weight of the keyboard. The touch sensitivity type is commonly applied to all Voices.
Page 56: Using The Metronome
Using the Metronome The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and check how a specific tempo sounds. Press the [METRONOME ON/OFF] button to start/stop the metronome. Adjusting the Metronome Tempo Press one of the TEMPO [-]/[+] buttons to call up the pop-up tempo setting display.
Page 57 Advanced Features Chapter 2. Refer to the Reference Manual on the website, Selecting GM/XG or other Voice Selection display → [8](UP) → [2] (P2) Voices from the Panel: Adjusting the depth of Reverb [FUNCTION] → TAB [L][R] MENU1 → [F] VOICE SETTING → and Chorus for VRM Voices: TAB [L][R] PIANO →...
Page 58: Accompaniment
Styles – Playing Rhythm and Accompaniment – The instrument features a variety of accompaniment and rhythmic backing patterns (called “Styles”) in a variety of different musical genres including pop, jazz, and many others. Each Style features Auto Accompaniment, letting you produce automatic accompaniment playback simply by playing “chords”...
Page 59 Press the [SYNC START] button to enable synchronized start. As soon as you play a chord (page 60) with your left hand, all parts of the selected Style start. Try playing chords with your left hand and play a melody with your right along with the rhythm.
Page 60: Chords
For users who are unfamiliar with chords, this handy chart features common Chords chords for your quick reference. Since there are many useful chords and many different ways to use them musically, refer to commercially available chord books for further details. ...
Page 61 Single Lets you easily play chords in the accompaniment range of the keyboard using only Finger one, two or three fingers. This type is available only for Style playback. Major chord Press the root key only. Minor chord Simultaneously press the root key and a black key to its left. Seventh chord Simultaneously press the root key and a white key to its left.
Page 62: Operating Style Playback
Operating Style Playback To Start/Stop Playing  [START/STOP] button Rhythm Parts of the Style starts playing back as soon as the [START/ STOP] button is pressed. To stop playback, press the button again.  [SYNC START] button This puts the Style playback in standby. The Style starts playing back when you press any note on the keyboard (when [ACMP ON/OFF] is off) or you play a chord with your left hand (when [ACMP ON/OFF] is on).
Page 63 About the lamp status of the section buttons (INTRO/MAIN VARIATION/BREAK/ ENDING) • Red: The section is currently selected. • Red (flashing): The section will be played next, following the currently selected section. * The Main [A] – [D] buttons also flash red during fill-in playback. •...
Page 64: Adjusting The Tempo
Adjusting the Tempo  TEMPO [-]/[+] buttons By pressing the TEMPO [-] or [+] button, you can decrease/increase the tempo over a range of 5 – 500. While the TEMPO pop-up is shown on the display, you can also use the [DATA ENTRY] dial to adjust the value.
Page 65: Calling Up Optimum Styles For Your Performance (Style Recommender)
Automatically changing One Touch Settings with the Main sections The convenient OTS (One Touch Setting) Link function lets you automatically have One Touch Settings change when you select a different Main section (A – D). The Main sections A, B, C and D correspond to One Touch Settings 1, 2, 3 and 4 respectively. To use the OTS Link function, turn the [OTS LINK] button on.
Page 66 Example 1: Play the following piece on the Piano section. The Styles that suit your performance with similar tempo are listed. Example 2: Play the following rhythm on the Drum section. Snare Kick The Styles that contain the similar drum patterns are listed. Select the desired Style from the list by using the [1] –...
Page 67: Turning Style Parts On/Off And Changing Voices
Turning Style Parts On/Off and Changing Voices A Style contains eight parts: RHY1 (Rhythm 1) – PHR2 (Phrase 2) below. The performance data of each part is played back in the corresponding channel. You can add variations and change the feeling of a Style by selectively turning channels on/off as the Style plays.
Page 68: Adjusting The Volume Balance Between Style And Keyboard
Adjusting the Volume Balance Between Style and Keyboard If you feel the sound that you play on the keyboard doesn’t seem to be loud enough (or is too loud) in comparison to the Style or Song playback (page 71) volume, you can adjust the volume of each independently.
Page 69: Changing The Split Points
Changing the Split Points These are the settings (two Split Points) that separate the different sections of the keyboard: the Chord section, the LEFT part section and the RIGHT1 and 2 section. The two Split Point settings (below) are specified as note names. Split Point (STYLE) Split Point (LEFT) Voice RIGHT1 –...
Page 70 Style file compatibility This instrument uses the SFF GE file format (page 8) and can play back existing SFF files; however, they will be saved in the SFF GE format when the file is saved (or loaded) in this instrument. Please keep in mind that the saved file can only be played back on instruments that are compatible with the SFF GE format.
Page 71: Songs
Song Playback – Playing and Practice Songs – For the Clavinova, “Song” refers to MIDI songs, which include preset songs, commercially available MIDI files, and so on. Not only can you play back a Song and listen to it, but you can also play the keyboard along with Song playback.
Page 72: Operations During Playback
If you’ve selected the “PRESET” tab in step 2, first select a browsing method by using the [A] – [C] buttons, then select a Song category by using the [A] – [J] buttons. The preset Songs are categorized and contained in appropriate folders. Select the desired Song by using the [A] –...
Page 73 Indicates Preset Songs saved to the User tab display and Disklavier Piano Soft Songs. These cannot be copied/moved/saved to USB flash drives. • Prot. 2 Orig: Indicates Yamaha-protection-formatted Songs. These cannot be copied. These can be moved/saved only to the User drive and USB flash drives with ID. • Prot. 2 Edit: Indicates edited “Prot.
Page 74: Displaying Music Notation (Score)
Displaying Music Notation (Score) You can view the music notation (score) of the selected Song. We suggest that you read through the music notation before starting to practice. You can also convert your recorded Songs to notation with this operation. NOTE The instrument can display the music notation of commercially-available music data or your recorded Songs.
Page 75: Displaying Lyrics (Text)
Displaying Lyrics (Text) When the selected Song contains lyric data, you can view it on the instrument’s display during playback. Select a Song (steps 1 – 4 on page 71). Press the [LYRICS] button to call up the Lyrics display. When the Song data contains lyrics data, the lyrics are shown on the display.
Page 76: One-Handed Practice With The Guide Lamps
One-handed Practice with the Guide Lamps The key guide lamps indicate the notes you should play, when you should play them, and how long you should hold them down. You can also practice at your own pace — since the accompaniment waits for you to play the notes correctly.
Page 77: Repeat Playback
Repeat Playback The Song Repeat functions can be used to repeatedly play back a Song or a specific range of measures in a Song. This is useful for repeated practicing of difficult-to-play phrases. To repeat a Song, turn the [REPEAT] button on and playback the desired Song. Turning the [REPEAT] button off cancels Repeat playback.
Page 78: Playing Multiple Songs Repeatedly
Playing Multiple Songs Repeatedly Select a Song in a folder containing multiple Songs (steps 1 – 4 on page 71). For example, select a Song from a folder of the preset Songs. NOTE The preset Songs in the “Follow Lights” folder contain the Guide settings. These Songs are inappropriate for use with ALL or RANDOM repeat.
Page 79: Song Recording Via Midi - Recording
Song Recording via MIDI – Recording Your Performance via MIDI – This instrument allows you to record your performance with the following two methods. • MIDI recording (described in this chapter) With this method, recorded performances are saved as SMF (format 0) MIDI files. If you want to re-record specific sections or edit parameters such as those of Voice, use this method.
Page 80 Press the SONG CONTROL [STOP] button to stop recording. A message prompting you to save the recorded performance appears. To close the message, press the [EXIT] button. Press the SONG CONTROL [PLAY/PAUSE] button to play back the recorded performance. Save the recorded performance as a file. Press the [SONG SELECT] button to call up the Song Selection display, in which you can save the recorded performance as a file.
Page 81: Saving Files
Saving Files This operation lets you save your original data (such as Songs you’ve recorded and Voices you’ve edited) to a file. The explanations here apply when you save your recorded performance as a Song file. In the relevant File Selection display, press the TAB [L][R] buttons to select “USER”...
Page 82: Complete A Piano Piece By Recording The Right- And Left-Hand Parts Separately (Multi Channel Recording)
Complete a Piano Piece by Recording the Right- and Left-hand Parts Separately (Multi Channel Recording) The Multi Channel Recording method let you record data to each channel independently, one by one, up to 16. Here, you will learn how to create a complete, two-handed piano piece by recording the right-hand part to channel 1, and then recording the left-hand part to channel 2 while listening to the already recorded data.
Page 83 Record the left-hand performance to channel 2. While holding down the SONG CONTROL [REC] button, press the [2] button to set channel 2 to “REC.” NOTICE If you record to a channel which has already recorded data, the existing data will be erased and overwritten with the new data.
Page 84: Usb Audio Player/Recorder - Playback
USB Audio Player/Recorder – Playback and Recording Audio Files – The convenient USB Audio Player/Recorder allows you to play back audio files (.WAV) saved to a USB flash drive — directly from the instrument. Moreover, since you can record your performances and recordings as audio data (.WAV) to a USB flash drive, it is possible to play back the files on computer, share them with your friends, and record your own CDs to enjoy...
Page 85 Press one of the [A] – [J] buttons corresponding to the file you want to listen to. Call up MENU1 at the right bottom of the display by pressing the [8] button as necessary. NOTE To confirm the information of the currently selected audio file, press the [6] button to call up the Information display. To exit from the Information display, press the [F] (OK) button.
Page 86 Playback-related Operations Stop Select next file (Hold this to move forward continuously through the current file) Play/Pause Select previous file (Hold this to move backward continuously through the current file)  Adjusting the volume of audio playback [6] (AUDIO VOLUME) buttons These let you adjust the playback volume of an Audio file.
Page 87 Canceling the Vocal Part and Playing the Part with Backing (Vocal Cancel) This lets you cancel or attenuate the center position of the stereo sound. This lets you sing “karaoke” style with just instrumental backing, since the vocal sound is usually at the center of the stereo image in most recordings.
Page 88: Recording Your Performance As Audio
Recording Your Performance as Audio Try recording your performance as audio data to a USB flash drive. NOTE To record your performance with the USB Audio Player/Recorder, make sure to use a compatible USB flash drive. Before using a USB flash drive, be sure to read “Connecting a USB Device”...
Page 89 Start recording by pressing the [3] (PLAY/PAUSE) button, then start your performance. When recording begins, the elapsed recording time is shown on the right side of the Recording display. Recordable time NOTICE Never attempt to disconnect the USB flash drive or turn the power off during playback. Doing so may corrupt the USB flash drive data or the recording data.
Page 90: Connecting A Microphone
Microphone – Connecting a Microphone and Singing Along with Your Performance – By connecting a microphone to the [MIC/LINE IN] jack (standard 1/4" phone jack), you can enjoy singing along with your keyboard performance or with Song playback. The instrument outputs your vocals through the built-in speakers.
Page 91 Useful Functions for Karaoke Singing  When using the preset Songs: • Lyrics on the display ..page 75 • Transpose, Pitch Shift ..page 50  When using the Audio Songs: • Vocal Cancel ....page 87 • Pitch Shift......page 86 Disconnecting the microphone Set the [INPUT VOLUME] knob to the minimum position.
Page 92: Selecting Desired Panel Settings From The Records
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – If you want to play in a certain genre of music but don’t know which Style and Voice settings would be appropriate, the convenient Music Finder function can help you out. Simply select the desired music genre (or song title) from among the Music Finder panel settings, and the instrument automatically makes all appropriate...
Page 93 Play the Style by playing chords with your left hand and the melody with your right (page 59). You can download the Records (panel settings) from the Yamaha website, and then load them to this instrument (page 93). NOTE Don’t turn off the [OTS LINK] button. When turned off, you cannot call up the appropriate panel settings even when you select the record.
Page 94 Use the TAB [L][R] buttons to call up the USB display containing the panel settings file downloaded from the website. Select the desired file by pressing the appropriate [A] – [J] button. Press [H] (APPEND) if you want to add Records of the selected Music Finder file, or press [G](REPLACE) if you want to replace all Records with the new ones.
Page 95: Searching For The Panel Settings
Searching for the Panel Settings You can search for the Records by specifying a song name or keyword, using the Search function of the Music Finder. From the ALL page of the MUSIC FINDER display, press the [6] (SEARCH 1) button to call up the Search 1 display.
Page 96 [3UD] TEMPO FROM Sets a tempo range to which the search will be limited. [4UD] TEMPO TO Selects the desired music genre. [5UD]/ GENRE [6UD] To cancel searching, press the [8] (CANCEL) button. Press the [8] (START SEARCH) button to start the search. The Search 1 display appears, showing the results of the search.
Page 97: Recalling Custom Panel Setups
Registration Memory – Saving and Recalling Custom Panel Setups – The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for eight Registration Memory buttons should be saved as a single Bank (file).
Page 98: Saving The Registration Memory As A Bank File
About the lamp status • Red: Data registered and currently selected • Green: Data registered but not currently selected • Off: No data registered Register various panel setups to other buttons by repeating steps 1 – 4. The registered panel setups can be recalled by simply pressing the desired number button. NOTE The panel setups registered in the numbered buttons are preserved even when you turn off the power.
Page 99: Recalling A Registered Panel Setup
Press the [6] (SAVE) button to save the Bank file. For instructions on saving, refer to the operation steps (starting from Step 4) on page 81. Recalling a Registered Panel Setup The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or the following procedure.
Page 100: Basic Procedure
Mixing Console – Editing the Volume and Tonal Balance – The Mixing Console gives you intuitive control over various sonic aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to set the optimum balance and stereo image, and lets you set how the effects are...
Page 101  To select the target parts: Press the [MIXING CONSOLE] button repeatedly to call up the display for the following parts in sequence. • PANEL PART Use this display when you want to adjust the balance between the entire Song part, entire Style part, Mic part, Right 1 part, Right 2 part and Left part.
Page 102 • EQ Boosts or attenuates the high and low frequencies bands for each part to correct the tone or timbre of the sound. • MEQ Selects the Master EQ type that is applied to the overall sound, and lets you edit the parameters for tone control.
Page 103: Connecting Audio Devices
Connections – Using Your Instrument with Other Devices – CAUTION Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur.
Page 104: Connecting A Microphone Or Guitar
Playing External Audio Devices with the Built-in Speakers You can connect the output jacks of an external device such as portable audio player to the instrument’s AUX IN jack, letting you hear the sound of that device through the built-in speakers of the instrument. NOTICE To avoid damaging the device, first turn on the power to the external device, then to the instrument.
Page 105: Connecting A Footswitch/Foot Controller
Connecting a Footswitch/Foot Controller The FC4A, FC4 or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to the [AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameters such as volume.
Page 106: Connecting A Usb Device
The number of USB flash drives that can be used The instrument does not necessarily support all simultaneously with musical instruments even when a commercially available USB devices. Yamaha cannot USB hub is used is a maximum of two.) This instrument guarantee operation of USB devices that you purchase.
Page 107: Formatting A Usb Flash Drive
Formatting a USB flash drive When a USB flash drive is connected, a message may appear prompting you to format. If so, execute the format operation. NOTICE The format operation deletes any previously existing data. Make sure that the USB flash drive you are formatting does not contain important data.
Page 108: Connecting To A Computer
In this case, connect the smart device to the [USB TO HOST] terminal via the Yamaha i-UX1 (sold separately) or to the MIDI terminals via the Yamaha i-MX1 (sold separately). By using an application tool on your smart device, you can take advantage of convenient functions and get more enjoyment out of this instrument.
Page 109 Attaching an iPad to the Music Rest Set the holder set (included accessories) on the bottom of the music rest, then set your iPad on the holders. NOTICE To prevent the iPad from falling, note the following points: • Never submit the instrument or iPad to strong shocks. Doing so may cause the iPad to fall from the music rest even though the iPad is set firmly.
Page 110: Connecting External Midi Devices
Connecting External MIDI Devices For details about MIDI, refer to “MIDI Basics” downloadable from the Yamaha website (page 9). Use the [MIDI] terminals and standard MIDI cables to connect external MIDI devices (keyboard, sequencer, etc.). • MIDI IN..... Receives MIDI messages from another MIDI device.
Page 111: Settings
Utility/System – Making Global Settings – The Utility and System sections in the Function menu provide a variety of convenient tools and settings for the instrument. These include general settings that affect the entire instrument, as well as detailed settings for specific functions. Also included are data reset functions and storage media control, such as media formatting.
Page 112: Basic Procedure
 BACKUP/RESTORE For backing up or restoring the settings and data saved in the USER drive of the instrument (page 38) to or from a USB flash drive.  SETUP FILES For saving and recalling the specified settings of the instrument. ...
Page 113: Assembly
Assembly Preparation Before Assembling Headphone hanger Assembly parts CAUTION 6 x 20 mm 4 x 10 mm • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation.
Page 114 Attach B. Align the holes on the upper side of B with the bracket holes on D and E, then attach the upper corners of B to D and E by finger-tightening two screws G. Secure the bottom end of B using four screws H. Securely tighten the screws G on the top of B that were attached in Step 2- 1.
Page 115 Rotate the adjuster until it comes in firm When moving the instrument after assembly, always contact with the floor surface. hold the bottom of the main unit. CAUTION When moving the instrument, always hold the bottom of the main unit. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury.
Page 116: Troubleshooting
Troubleshooting Overall A click or pop is heard when the Electrical current is being applied to the instrument. This is normal. power is turned on or off. The power is automatically turned off. This is normal and due to the Auto Power Off function. If necessary, turn the function off (page 18).
Page 117 Overall An existing file is not shown on the The file extension (.MID, etc.) may have been changed or deleted. Manually display. rename the file, adding the appropriate extension, on a computer. Data files with names of more than 50 characters cannot be handled by the instrument.
Page 118 Song When playing back a Song, some Playback of these channels may be set to “OFF.” Turn playback ON for those channels do not play. channels that are set to “OFF” (page 75). The Guide lamps do not light during Any notes outside of the 88-key range cannot be indicated by the Guide lamps.
Page 119: Panel Button Chart
Panel Button Chart No........Corresponds to the number in the “Panel Controls” on page 14. Button/Control ..... Indicates the button/controller that you should use at first for entering the corresponding function. Display......Indicates the display title (and tab title) called up by operating the button/controller. Reference Manual..
Page 120 Reference Button/Control Display Page Manual [MIXING CONSOLE] [CHANNEL ON/ CHANNEL SONG OFF] ON/OFF STYLE (pop-up) TAB [L][R] [A] – [J] [DIRECT ACCESS] (message) [EXIT] [1] – [8] buttons [DATA ENTRY] dial [ENTER] [USB] USB display [FUNCTION] MENU1 SPLIT POINT/ SPLIT POINT CHORD CHORD 60, 70...
Page 121 Reference Button/Control Display Page Manual [FUNCTION] MENU2 MIC SETTING SYSTEM OWNER BACKUP/ RESTORE SETUP FILES RESET WIRELESS LAN PART ON/OFF [RIGHT1]/ [RIGHT2]/[LEFT] & [AUDIO] USB AUDIO PLAYER display SONG [SONG SELECT] Song Selection display CONTROL [REC] CHANNEL ON/OFF (pop-up) [STOP] [PLAY/PAUSE] [REW]/[FF] SONG POSITION (pop-up)
Page 122: Specifications
English only Cabinet Key Cover Style Sliding Music Rest Voices Tone Generation Piano Sound Yamaha CFX, Bösendorfer Imperial Piano Effect Key-off Samples Smooth Release Polyphony Number of Polyphony (Max.) Preset Number of Voices 777 Voices + 29 Drum/SFX Kits +480 XG Voices...
Page 123 Effects Types Reverb 58 Preset + 3 User Chorus 106 Preset + 3 User 295 Preset + 3 User Master EQ 5 Preset +2 User Part EQ 27 Parts Master Compressor 5 Preset + 5 User Intelligent Acoustic Control (IAC) Stereophonic Optimizer Functions Dual (Layer)
Page 124 The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file.
Page 125: Index
Index Direct Access ..............28 Display ............... 21, 25 A-B Repeat ..............77 ..................52 Accessories ................ 9 Accompaniment ............58 ACMP ON/OFF ............58 ADD TO MF ..............96 Editing Voices ..............57 Assembly ............... 113 EFFECT ................. 101 Audio ................
Page 126 Piano Reset ..............48 Piano Room ..............40 Key Cover ................ 16 Pitch ................50, 86 KEYBOARD HARMONY ......... 52 Playback (Song) ............. 71 Keyboard parts .............. 47 Playback (Style) ............. 62 Power ................17, 18 Power cord ..............17 Language ................
Page 127 Split Points VOL/VOICE ..............69 ..............101 START/STOP Volume (Audio) ............59, 62 ............86 Step Recording Volume (master) ............... 83 ............19 Stereophonic Optimizer Volume (Voice, Style, Song, Audio) ..........20 ...... 68 Style Volume Balance ................... 58 ............68 Style channels ..............
Page 128 Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
Page 130 New Zealand Tel: +359-2-978-20-25 Tel: +90-212-999-8010 Tel: +64-9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN http://asia.yamaha.com Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan DMI15 (For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany...
Page 131 Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Department © 2015 Yamaha Corporation Published 03/2016 MWGR*.*- **B0 Printed in Indonesia ZN76480 ZN76480...

This manual is also suitable for:

Cvp-701Clavinova cvp-701pe Clavinova cvp-701b

Yamaha CLAVINOVA CVP-701 Owner's Manual

Precautions

Notice

Information

About the Manuals

Included Accessories

Welcome to Clavinova

Panel Controls

Starting up

1 Piano Room - Enjoying Piano

Performance

2 Voices - Playing the Keyboard -

3 Styles - Playing Rhythm and

Accompaniment

4 Song Playback - Playing and Practice

Songs

Song Recording Via MIDI - Recording

Your Performance Via MIDI

USB Audio Player/Recorder - Playback

And Recording Audio Files

Microphone and Singing Along with

7 Microphone - Connecting a

Your Performance

(Voice, Style, Etc.) for each Song -

8 Music Finder - Calling up Ideal Setups

9 Registration Memory - Saving and

Recalling Custom Panel Setups

And Tonal Balance

10 Mixing Console - Editing the Volume

With Other Devices

11 Connections - Using Your Instrument

12 Utility/System - Making Global

Settings

Assembly

Troubleshooting

Panel Button Chart

Specifications

Index

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Yamaha CLAVINOVA CVP-701

Summary of Contents for Yamaha CLAVINOVA CVP-701

This manual is also suitable for:

Table of Contents