Yamaha cvp-701 clavinova Reference Manual page 90

GLIDE
PORTAMENTO
PITCH BEND*
11
MODULATION*
MODULATION
(ALT)
DSP VARIATION
VIBE ROTOR ON/OFF
KEYBOARD
HARMONY
TALK
90
CVP-701 Reference Manual
When the pedal is pressed, the pitch changes, and then returns to normal pitch
when the pedal is released. The following parameters can be set for this func-
tion on this display.
UP/DOWN
Determines whether the pitch change goes up (is raised) or down (is lowered).
RANGE
Determines the range of the pitch change, in semitones.
ON SPEED
Determines the speed of the pitch change when the pedal is pressed.
OFF SPEED
Determines the speed of the pitch change when the pedal is released.
LEFT, RIGHT 1, 2
Turns this pedal function on or off for each keyboard part.
The portamento effect (a smooth slide between notes) can be produced while
the pedal is pressed. Portamento is produced when notes are played legato style
(i.e., a note is played while the preceding note is still held). The portamento
time can also be adjusted form the Mixing Console display
function does not affect certain Natural Voices, which would not sound appro-
priately with this function.
This function will not affect any of the Organ Flutes, Super Articulation Voices and only some of the Super
Articulation Voices, even if this has been assigned to the Foot Pedals.
Allows you to bend the pitch of notes up or down by using the pedal. This
function can be assigned to the right pedal or connected foot controller. The
following parameters can be set for this function on this display.
UP/DOWN
Determines whether the pitch change goes up (is raised) or down (is lowered).
RANGE
Determines the range of the pitch change, in semitones.
LEFT, RIGHT 1, 2
Turns this pedal function on or off for each keyboard part.
Applies a vibrato effect to notes played on the keyboard. Moreover, various
effects can be added to the Super Articulation Voice. The effect becomes
deeper when pressing down the foot controller. You can turn this pedal func-
tion on or off for each keyboard part on this display.
This is a slight variation on MODULATION above, in which the effects (wave-
form) can be switched on/off by each press of the pedal/footswitch. The modu-
lation effect is alternately turned on and off each time the pedal/footswitch is
pressed. You can turn this function on or off for each keyboard part on this dis-
play.
Switches Voice Effect DSP VARIATION on and off.
Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE
effect type is selected.
Switches the Harmony or Echo effect on and off.
Switches the microphone setup settings between Vocal and Talk.
(page 81). This