Yamaha cvp-701 clavinova Reference Manual page 68

Hide thumbs Also See for cvp-701 clavinova:
Table of Contents

Advertisement

NOISE GATE (selected by [C]/[D] buttons)
This effect mutes the input signal when the input from the microphone falls below a specified level. This
effectively cuts off extraneous noise, allowing the desired signal (vocal, etc.) to pass.
[1]
[2]
COMPRESSOR (selected by [C]/[D] buttons)
This effect holds down the output when the input signal from the microphone exceeds a specified level.
This is especially useful for smoothing out vocals that have widely varying dynamics. It effectively
"compresses" the signal, making soft parts louder and loud parts softer. For a maximum compression
effect, set RATIO to a high setting and adjust the OUT parameter for optimum volume.
[3]
[4]
[5]
[6]
TALK Page
7
The settings here are for your speech or announcements (NOT your singing performance), and are active when
the TALK
below) are the same as in the VOCAL page. However, the settings are independent from those in the VOCAL
page.
TALK MIXING (selected by [E] button)
[1]
[2]
[3]
[4]
[5]/
[6]
68
CVP-701 Reference Manual
SW (Switch)
Turns the Noise Gate on or off.
TH. (Threshold)
Adjusts the input level at which the gate begins to open.
SW (Switch)
Turns the Compressor on or off.
TH. (Threshold)
Adjusts the input level above which the Compressor is applied.
RATIO
Adjusts the compression ratio. Higher ratios result in a more compressed
sound, with a reduced dynamic range.
OUT
Adjusts the final output level.
(page
66) is set to ON. All indications and parameters (with the exception of TALK MIXING
VOLUME
Determines the output volume of the microphone sound.
PAN
Determines the stereo pan position of the microphone sound.
REVERB
Determines the depth of the reverb effects applied to the microphone
DEPTH
sound.
CHORUS
Determines the depth of the chorus effects applied to the microphone
DEPTH
sound.
REDUCTION
Determines the amount of reduction to be applied to the overall sound
LEVEL
(excepting the microphone input) — allowing you to effectively adjust
the balance between your voice and the overall instrument sound.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents