Yamaha cvp-701 clavinova Reference Manual page 52

Example of Step Recording — Melodies
In this example, keep in mind that one of the steps involves holding down a key on the keyboard while
executing the operation.
Select the Voice for recording after calling up the Step Recording display.
Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown here.
The illustration given here is just a sample for entering. Non-note musical performance symbols will not be shown in the Score display, even if you've
entered them.
1
Enter the first and second notes with a slur.
5
1-1
Press the [G] button to select "f."
1-2
Press the [H] button to select "Ten." (Tenuto).
1-3
Press the [I] button to select the dotted note type.
1-4
Select the dotted quarter-note by using the [6] buttons.
1-5
Play the C3 key.
The first note is entered.
1-6
Press the [I] button to select the "normal" note type.
1-7
Press the [7] button to select the eighth-note length.
1-8
Play the D3 key.
The second note is entered.
2
Enter the next notes and apply staccato.
2-1
Press the [H] button to select "Sta." (Staccato).
There are two Staccato settings; choose the "40%" setting.
2-2
Press the [6] button to select the quarter-note length.
2-3
Play the keys E3 and F3 in order.
The first measure has been completed.
3
To enter a quarter-note rest, press the [6] button again.
To enter the rest, use the [4] – [8] buttons. (Press the button once to select the rest value, and
once again to actually enter it.) A rest having the specified note length will be entered.
52
CVP-701 Reference Manual
1 2 3 4
* The numbers shown in the illustration
correspond to the following operation
step numbers.