Realtime Recording - Yamaha cvp-701 clavinova Reference Manual

Realtime Recording

In the BASIC Page, you can create a single Style by recording the individual channels one-by-one, using
realtime recording.
Realtime Recording Characteristics — Loop Recording and Overdub Recording
• Loop Recording
Style playback repeats the rhythm patterns of several measures in a "loop," and Style recording is also
done using loops. For example, if you start recording with a two-measure MAIN section, the two
measures are repeatedly recorded. Notes that you record will play back from the next repetition (loop),
letting you record while hearing previously recorded material.
• Overdub Recording
This method records new material to a channel already containing recorded data, without deleting the
original data. In Style recording, the recorded data is not deleted, except when using functions such as
Rhythm Clear (page
For example, if you start recording with a two-measure MAIN section, the two measures are repeated
many times. Notes that you record will play back from the next repetition, letting you overdub new
material to the loop while hearing previously recorded material.
When creating a Style based on an existing internal Style, overdub recording is applied only to the
rhythm channels. For all other channels (except rhythm), you need to delete the original data before
recording.
1
When you want to create a Style based on an existing Style, select the desired Style to
serve as the basis for recording/editing before calling up the Style Creator display.
2
Call up the operation display.
[FUNCTION] → TAB [L][R] MENU2 → [A] STYLE CREATOR
The BASIC Page is shown.
3
If you want to create a new Style from scratch, press the [C] (NEW STYLE) button to
delete the data of all channels.
4
Select the desired section (Intro, Main, Ending, etc.) for your new Style.
First close the RECORD display by pressing the [EXIT] button. Then use the [3]/[4] buttons to
select the section to be recorded.
To call up the RECORD display again, press the [F] (REC CH) button.
You can specify the sections to be recorded by using the Section buttons on the panel. Refer to step 3 on
You cannot select INTRO 4 and ENDING 4 sections directly via panel operations.
27) and Delete (page 26).
5
-2
4 5
-1
page 28.
CVP-701 Reference Manual
3
25