Yamaha cvp-701 clavinova Reference Manual page 37

3 HIGH KEY / NOTE LIMIT
[4]/ HIGH KEY
[5]
[6] NOTE LIMIT
LOW
[7] NOTE LIMIT
HIGH
4 RTR (Retrigger Rule)
These settings determine whether notes stop sounding or not and how they change pitch in response to
chord changes.
STOP
PITCH SHIFT
PITCH SHIFT TO
ROOT
RETRIGGER
RETRIGGER TO
ROOT
This sets the highest key (upper octave limit) of the note transposition for
the chord root change. Any notes calculated to be higher than the highest
key are transposed down to the next lowest octave. This setting is
effective only when the NTR parameter
Example — When the highest key is F
Root changes
Notes played
C3-E3-G3
These set the note range (highest and lowest notes) for Voices recorded to
the Style channels. By judicious setting of this range, you can ensure that
the Voices sound as realistic as possible — in other words, that no notes
outside the natural range are sounded (e.g., high bass sounds or low pic-
colo sounds).
Example — When the lowest note is C3 and the highest is D4
Root changes
Notes played
E3-G3-C4
The notes stop sounding.
The pitch of the note will bend without a new attack to match the type of the
new chord.
The pitch of the note will bend without a new attack to match the root of the
new chord. However, the octave of the new note remains the same.
The note is retriggered with a new attack at a new pitch corresponding to the
next chord.
The note is retriggered with a new attack at the root note of the next chord.
However, the octave of the new note remains the same.
(page 35) is set to "Root Trans."
C ♯ M
CM
C ♯ 3-F3-G ♯ 3
F3-A3-C4
C ♯ M
CM
F3-G ♯ 3-C ♯ 4
F3-A3-C4
CVP-701 Reference Manual
F ♯ M
FM
F ♯ 2-A ♯ 2-C ♯ 3
FM
High Limit
Low Limit
3
37