Manual Mode; Preliminary Instructions - True ZTX 825HRC Owner's Manual

Manual Mode

In the manual mode you can set the duration or distance of the workout to count down.
You may also start the workout without setting any parameters and the treadmill will
automatically begin your workout at .5 MPH and 0% grade. You can then manually
change both the speed and grade at any time during the workout. You may also monitor
your heart rate with the heart rate contacts or the heart rate transmitter strap (sold
separately). Heart rate monitoring will not affect the workout.

Preliminary Instructions

1. Inspect the treadmill before using it.
CAUTION:
Keep area under the treadmill free from obstructions because
the deck returns to 0% grade when the SAFETY KEY is
placed. Failure to do so could cause personal injury or
damage to the machine.
La Prudence:
Garder le domaine sous le sans treadmill des obstructions
parce que le pont se retourne à 0% degré quand la clef de
sûreté est insérée. Echec pour ainsi faire pourrait causer
personnel blessure ou dommages à la machine.
2. Plug in the machine to a dedicated, 3-prong, grounded,
120/230 VAC, 20 amp outlet.
3. Turn power on with the ON/OFF switch.
4. Step onto treadmill and straddle the tread belt by placing one
foot on each of the Straddle Covers.
CAUTION:
Do not step on the roller when getting on the treadmill. The
roller moves and may cause you to fall.
La Prudence:
Ne Faire pas l'étape sur le cylindre en recevant sur le treadmill.
Les mouvements de cylindre et peut vous causer de tomber.
Section C
31