Workout Instructions - True ZTX 825HRC Owner's Manual

Manual Mode
Helpful Operation (Continued)
1. Press
The DISTANCE and TIME/PACE Windows will blink and the following
messages will repeat themselves in the Message Center one at a time:
ADJUST TIME +
ADJUST DISTANCE
PRESS START
2. Use
to enter a value for time.
3. Press
4. Press
The following messages will repeat themselves in the Message
Center one at a time:
NOTE:
When using the countdown feature, both time and distance
functions will give you an audible signal and begin counting
up when the time or distance has reached "0". The tread belt
will continue to move.

Workout Instructions

1. Press to start the belt in motion.
The Upper Control Panel gives audible signal three times.
2. Hold the handlebar, carefully step onto the tread belt, and
begin walking.
3. Adjust the speed or grade:
a. Use
to input the numeric value.
three times.
to enter a value for distance.
.
MANUAL
EDIT-SELECT
NEXT UP/DOWN
PRESS START
The following message will display in the Message Center:
DATA= (XXX)
Section D
Continued on Next Page
53